020-84858360
020-84858360
As an indispensable product for bottles, bottle brush hydro flask has always been very effective. How does Aoqun recommend a suitable bottle brush hydro flask? 1. According to the size: bottle brush hydro flask not only needs to adapt to the size of the bottle body, but also pay attention to the diameter of the bottle mouth. If the bottle mouth is too small or the bottle body is too large, the diameter of the bottle brush hydro flask needs to be reduced appropriately, or special custom made. The total length of the bottle brush hydro flask should be appropriately longer than the bottle. 2. According to the material: choose soft nylon wool. It is not advisable to choose too large and hard wool, otherwise it may scratch the body. Choose 304 stainless steel wire, do not choose rubberized wire or inferior stainless steel wire, because inferior steel wire will be rusted due to long-term use in contact with water. If the rust remains in the bottle, it will endanger your health. 3. According to the process: a bottle brush hydro flask with qualified tensile strength should be used, which will not shed hair or stain; use a treatment method with hair on the head to prevent the bottom of the bottle from being directly scratched by the stainless steel. Aoqun’s bottle brush hydro flask is exported to more than 50 countries and regions in the world, and has also been recognized and praised by customers. They can do what their customers want and worry about what their customers are superior to. Their comprehensive thinking is also the reason for making accurate recommendations.
read more
Mr. Mo from Guangzhou said that he found us through his friend. Mr. Mo said that he wants to buy a bottle brush for thermos. He had previously purchased a batch of bottle brush for thermoses from other suppliers and received complaints from hundreds of customers in a few days because the filament was dropped during use. It seriously affected sales and made him lost money, also a bad influence on his brand. After communicating with Mr. Mo, we feel it is necessary to bring our bottle brush for thermos to visit him! We told Mr. Mo that we are very strict to the quality inspection of the brush. Especially for the bottle brush for thermos filament dropping. First of all, in the production process, we strictly control the filament of the shaft without loosening or falling off. After the production, the filament will be pulled by hand, and then the tensile force meter will be used for testing. It’s passed only when the tensile strength is ≥5kg (5 filaments are not pulled off) ). After our demonstration, Mr. Mo also tested by himself and then he eliminated the doubts about our bottle brush for thermos. He purchased 3,000 directly from us that day. Two months later, we received a call from Mr. Mo. He said that since the sale of our bottle brush for thermos, He had never received any complaints about quality problems such as brush filament drop. Sales volume has increased and his money had come back! He said that he will cooperate with us for a long time.
read more
Some time ago, Mr. Cory from the United States sent us an inquiry. He said that their company is producing portable water bags. He needs us to customize the suitable bottle brush flexible for their portable water bags. Mr. Cory sent us a picture of their portable water bag. We asked Mr. Cory to send us his portable water bag as a sample so that we could analyze the water bag more directly and customize the bottle brush flexible that fits the size and type of Mr. Cory's portable water bag. After receiving the portable water bag, we found that the general brush head could not wash the bottom of the water bag. We recommended the bottle brush flexible with tied head. The bottle brush flexible can go inside the flat bottom of the water bag which can play a very good cleaning role. We sent the bottle brush flexible as a sample to Mr. Cory. After receiving the sample, Mr. Cory was tested and cleaned, and he was very satisfied with the recommended bottle brush flexible. He said that the bottle brush flexible can thoroughly clean the bottom of his water bag. He is very satisfied.
read more
Tim, a customer from Germany asked us, “what are your best bottle brush for hydroflask?” After talking with Tim, we got to know that they sold the brush as a companion product to every consumer who bought the vacuum flask, but they received complaint that the brush had scratched the vacuum flask. The reason was that the filament was too hard. The customers were claimed for compensation. We recommended a bottle brush for hydroflask of pure nylon to Tim. The filament diameter of the brush was also adjusted appropriately, so that the bottle brush for hydroflask can clean the dirt in the bottle without damaging the inner wall of the bottle. After receiving the sample of the bottle from the customer and adjusting the samples many times, we finally customized a bottle brush for hydroflask suitable for the customer's vacuum flask. This bottle brush for hydroflask is soft, not only can completely clean the inside of the bottle, but also does not scratch the inner wall of the vase. We sent the sample with the vacuum flask together to Tim. After repeated tests, Tim decided to purchase 1000pcs bottle brush for hydroflask to try the market satisfaction. After receiving the brushes for one month, Tim contacted us and said that after this brush was sold as a companion product, many customers came to purchase the brush specially, which caused short supply. He urgently needed a large number of bottle brush for hydroflaskeand signed an annual contract with us.
read more
Recently, Mr. Dennis from Germany told us that the bottle brush electric he sells now has a poor cleaning effect. He wants to find a bottle brush electric that can be easily cleaned and has a remarkable cleaning effect. So, he wants us to solve this trouble for him by our professionalism. We asked Dennis to send us the Bottle brush electric they use now. After many tests and analyses on his brushes, we found that Dennis’ brush density is not enough. We started to make a sample for Dennis with the same length and twice brush density more than Dennis' current sample. Four days later, Dennis received samples from us and went through several cleaning tests. They are very satisfied with the samples. Because our brush cleaning effect is remarkable, it completely solves his troubles. He has purchased 5,000 bottle brush electric from us and plans to promote and sell them in Germany.
read more
Jim, a customer from the United States, is our old customer and he said that he would buy 10,000 bottle brush eco friendly again. However, he complained that he has to submit the information to the customs and pay taxes and it troubles him a lot in the previous shipment. He asked me if there is any way to solve this problem this time, he hoped to receive the goods directly. We immediately consulted our freight forwarder. The consultation of several freight forwarders is that this situation can be solved by a “clear the tax package” service. One of service is sea transport plus air transport, the time is about 25 days, and it is cheaper; the other type is air transportation, door to door, time is 8-15 days, more expensive than the first one. Considering that we recommend Jim to select door to door to ship bottle brush eco friendly, we can give him a discount on shipping. Three months later, we received an email from Jim saying that the goods had been received successfully. This time it was very convenient and timely, and he liked the delivery method. Jim said that he wants all the shipment to be door-to-door approach in the future, and it is expected that 50,000 bottle bottle brush eco friendly will be purchased again in the next three months.
read more
scan to wechat
scan to wechat
