020-84858360
020-84858360
Many people think that the medical instrument cleaning brushes can be bought casually. In fact, for scientific medical instruments, you should be more careful when choosing brushes. Mr. Chris of Canada told us when they purchased the test medical instrument cleaning brushes, the quality of the brushes was not good, which caused their experiments to fail and wasted their resources and time. Quality control is very important for brush, because a good test medical instrument cleaning brushes should be no filament loosened, not scratching the inner of tube. The test medical instrument cleaning brushes of AOQUN is customized for the medical instrument of scientific experiment. It is made of pure nylon bristle and high-quality stainless steel. The bristle is soft and has good tensile performance, clean the tube perfectly and the stainless steel tight the bristle well and no filament lost. Besides, the size is all customized according to customer needs. Since Mr. Chris purchased the test medical instrument cleaning brushes from us, the experimental failure due to the brush did not appear at all, greatly reducing their resource waste and time cost. Mr. Chris even recommended our products to other laboratories in their country.
read more
In August, I received an email from Kyle of Australia saying that the brush he bought from other suppliers were not cut well. The no uniform filament on the brush not only affects the appearance, but also affects the use, resulting in fewer orders for old customers. He asked if we can provide cut well medical instrument cleaning brushes? Our gold sales customer service Mary replied within 1 minute of receiving the Kyle's mail, and learned from Kyle that the original brush diameter is 6mm and the nylon wire diameter is 0.10mm. We told Kyle that because the brush diameter and the bristles were very small, the brush must first be dry, avoiding the longer filaments hidden in the medical instrument cleaning brushes while cutting, and keep the sharpness of the flying knife, finally there should be a full inspection to control each process, so that the medical instrument cleaning brushes would be cut well. Kyle was very satisfied with our professional explanation and paid a sample fee of usd100 for us to provide samples. After 3 days we sent the samples to Kyle. Kyle was very satisfied after receiving the medical instrument cleaning brushes. Each one was cut well. There was no uniform filament of the medical instrument cleaning brushes. On the same day, he gave us 20,000pcs purchase contracts and the full payment.
read more
Mr. Ryan from Argentina sent us an inquiry, and along with a picture of the medical stainless cleaning brush, he said: "he saw a brush when he went to the UK before. this brush was so beautiful and very nice. Mr. Ryan asked us if we would make same brush for him? After seeing the picture sent by Mr. Ryan, we found that this medical stainless cleaning brush was customized for our British customers, because the logo on the wooden handle of the brush was specially customized. We told Mr. Ryan that this type of medical stainless cleaning brush was produced by our company, and asked about the size and special requirements he needed. Then we customized the same medical stainless cleaning brush for him according to the information and requirements he provided. Five days later, Mr. Ryan received the sample we sent to him and said, "this is indeed the brush I saw in England. I thought you were lying to me, but I was so lucky to find this British medical stainless cleaning brush manufacturer. I hope you can customize such 5000 pieces medical stainless cleaning brush for me, thank you.
read more
Miss Li from Foshan found us by a friend. Miss Li wanted to buy nylon medical stainless cleaning brushes. She said she purchased one is made of nylon material previously, but it was easy to scratch the medical instrument after using, and it does not good elasticity and strong restoring force. Miss Li was also upset and asked if there was any good way to solve the problem. We told Miss Li that we certainly had a way to solve the problem. In addition, we also told Miss Li that our nylon material would never appear the situation she used before. Our nylon material, with excellent wear resistance, can be used in any environment for a long time. The most important thing is that our nylon materials are tested by SVHC and meet the technical standards of ROHS. At the same time, we also sent the nylon test report to Miss Li and Miss Li agreed. Later, Miss Li sent us the pictures and specifications of the products. We found that is a commonly used specification of medical stainless cleaning brush. Seven days later, we successfully made the sample according to requirements and sent the nylon medical stainless cleaning brush to Miss Li. Half a month later, we received an E-mail from Miss Li. She said the quality of this nylon medical stainless cleaning brushes were very good. Not only clean in place, but also will not scrap medical instrument; Miss Li said that the sample was very worthwhile and solved her worries completely. At the same time, she said the feedback is good, received a lot of customers’ order. She will purchase 5000 pieces at first, and will continue to make orders in the future, and she will also introduce customers to us.
read more
German customer Ellison is an old customer of our company. He said that there was a batch of medical tube cleaning brushes he purchased, and many customers asked him how to use it properly. Ellison said that he is also a layman in this area and does not know how to answer his customers. Ellison asked us if we could explain to him. We told Ellison that there is absolutely no problem in explaining to him. We know that Ellison purchase is a common medical tube cleaning brushes, although there are not too many strict requirements in terms of use, but the following details should be noted. First: The diameter of medical tube cleaning brushes should match the tube. If it is too large, it will easily crack the chemical tube. Secondly, the residual liquid in the tube should be washed by water first, and the overwhelming force should not be too large when brushing. In order to prevent crushing or puncturing the bottom of the tube; in addition, too much pressure will cause the shaft on both sides of brush to be distorted or overheated, resulting in broken shaft, rapid melting and reduced service life. Third: When there’s acid or alkali or corrosive liquid in the tube, it should be diluted or rinsed then we use the medical tube cleaning brushes to clean with water, hang and dry; Fourth: If necessary, add detergent to clean the tube, put the medical tube cleaning brushes back in place and fold it over the tube holder after washing. Two months later, we received an email from Ellison again. He said that his client used the medical tube cleaning brushes according to the method we explained. The effect is really different. Not only protects the test tube, but also greatly extends the service life. Ellison said that we are experts in making brushes. We will be a long-term supplier of medical tube cleaning brushes in China for them.
read more
Two months ago, Mr. Jorden from the United States contacted us through Alibaba. He said that they are a large-scale merchants of American laboratory instruments. They are now sourcing large quantities of brushes for tubes. Due to the semi-circular structure of the bottom of the tube, the previously purchased tube brush did not clean the tube well, so it didn’t sell well. He hopes that we can recommend a suitable tube brush for them. They usually use medical tube cleaning brushes. We learned about the size of their tubes from Jorden, and then we recommended the appropriate size of the medical tube cleaning brushes according to the size of the tube. Since the design of the medical tube cleaning brushes is also semi-circular, so it can well adapt to the shape of the bottom of the tube and it can thoroughly clean the inner wall of the tube and each corner. Jorden accepted the size design we recommended for him and placed an order of 1000 sets. After 15 days, we sent 1000 sets medical tube cleaning brushes to Jorden. After he received the brush for a month, he found us again and said that their sales volume has increased three times compared to the previous one. Now they want to buy 3,000 sets brushes of different sizes.
read more
scan to wechat
scan to wechat
